Mechanic Silver Conductive Paint Paste for PCB Circuit Board Repair

Mechanic Silver Conductive Paint Paste for PCB Circuit Board Repair

Features:

• Solid Content: 52%

• IR: 145±5℃ x 5min

• Square Resistance <15mΩ/O/25.4μm

• Specific Resistance≤5x10 - 5Ω - cm

• Hardness ≥2H

• Bend ≥8 times

Instructions:

• Do not remove the needle before using, twitch back and forth to make the conductive silver paint fully mixed.

• When using, remove the needle, squeeze the conductive silver paint, click a small amount of conductive silver paint with a needle, and draw a line at the broken line.

• After the silver paint is drawn, please allow one hour for drying.

• If you want it drying rapidly, blow it with a hairdryer for 5 - 10 minutes will be OK, but please pay attention to the temperature control.

 
Preservation method:

• The product should be kept at 0-10 Celsius.

• The product should be used for 12 months.

• The product should not be placed in the sun.

 
Precautions:

• Use only with adequate ventilation.

• The silver conductive paste contains an organic solvent. Avoid repeated contact with the skin. If the product gets on your skin, wipe it off with alcohol and rinse thoroughly with water.

• In order to be cautious, in the operation, the smoke released by the solvent during operation should be avoided as much as possible, and the skin and mucous membrane tissues should not be contacted for too long. Avoid repeated breathing of vapor.

• Avoid contact with eyes.

• Keep away from children.

Package includes:
1 x Silver Conductive Paint Paste