Hot selling USB intelligent adjustable constant current electronic load king mobile power detector line aging arrester
150W Multifunctional constant current load
180W Multifunctional constant current load
Performance parameters:
Input/output interface: 100A high current engagement screw post
Voltage measuring range: 0.00V~200V resolution accuracy: 0.01V V.
Current measurement range: 0.00A~20A resolution accuracy: 0.01A A.
Cumulative capacity range: 0~999.999Ah resolution accuracy: 0.01Ah
Cumulative power range: 0~9999.9Wh resolution accuracy: 0.01Wh
Power measurement range: 0000.00~150/180 W resolution accuracy: 0.01W W.
Impedance measurement range: 1~999.9 ohms resolution accuracy: 0.01 ohms
Temperature range: 0~99℃ 0~99℃ Resolution accuracy: 1℃.
Maximum timing time: 999 hours, 59 minutes and 59 seconds resolution accuracy: 1 second.
Measurement reminder setting: countdown to 24 hours, any set value.
Low current standby warning threshold parameters and timing: < 2w/0.5h; > 0.5W to start timing.
The DC voltage in the range of 4~30V supplies power to the measuring system.
Refresh time: > 500mS/ times > 500mS/ times
Measurement rate: about 0.5 times/second
Overvoltage setting alarm mode: display the alarm interface to remind users.
Overvoltage setting range: 1~200V
Low-voltage alarm setting range: 0~190V
Over-current reminder setting range: 0.2~100A
Type of display screen: micro-power LCD module LCM black font green backlit Chinese and English display screen.
Product size: 156mm*96mm*58mm
Working temperature: -10~+60℃ -10~+60℃
Working humidity: 10~80 (no doubt exposed) 10~80 (no doubt)
Working pressure: 80~106kPa
The 150 W load is updated to a red fan, and other functions remain unchanged.
Instruction for Connection and Operation :
1. Open the package, insert the power adapter into the end of the product and supply the power.
2. Anti-clockwise rotate the two current knobs to the lower limit.
3.
Connecting the Power Supply under test to the product according to the
diagram above, and the current input voltage value will be read out.
Keep pressing the key to reset all data to zero;
4.
Slowly clockwise rotate the two current knobs (coarse&fine) to
adjust the current to the rating value of the Power Supply(The current
should be slowly adjusted, using the fine knob priority, the coarse knob
could be only used under large current condition.)
5.
When testing the battery, Low voltage discharge limit should be set up,
to avoid the possible damage caused by over discharging while discharge
capacity test of the battery.
Note:
No retail package.
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Electronic Load Tester
